en

STANDARD LINE

MB 7.29 Vertical Press "Vertical bench press in a standing position" is used to develop the middle parts of the deltoid muscles as well as the upper parts of the trapezius muscles, the serratus anterior musculature and the triceps.


Specifications:

  • Plates: 10 x 10kg and 6 x 2,5kg
  • Maximum weight per arm: 57,5kg
  • Dimensions: lenght 1350mm x width 2070mm x hight 2060mm
  • Weight: 265kg

MB 7.54 Convergent Vertical Press "Convergent Vertical Bench Press in Stance" is used to develop the middle deltas, as well as the upper parts of the trapezius, the serratus anterior, and the triceps. The convergent motion sequence offers a particularly ergonomic training.


Specifications:

  • Plates: 10 x 10kg und 6 x 2,5kg
  • Maximum weight per arm: 57,5kg
  • Dimensions: lenght 1350mm x width 2010mm x hight 2020mm
  • Weight: 285kg
MB 7.30 Chest Press "Chest press in standing position" straight bench press with independently moving arms. The optimal position is achieved by adjusting the knee angle. A natural force curve promotes muscle building.


Specifications:

  • Plates: 14 x 10kg und 6 x 2,5kg
  • Maximum weight per arm: 77,5kg
  • Dimensions: lenght 1330mm x width 1950mm x hight 2100mm
  • Weight: 335kg
MB 7.52 Convergent Chest Press "Converging chest press in a standing position" promotes an extended amplitude of movement and maximizes the breast muscle response. The resistance profile coincides with the natural force curve of the chest muscles and promotes a highly effective load over the full course of the movement.


Specifications:

  • Plates: 14 x 10kg und 6 x 2,5kg
  • Maximum weight per arm: 77,5kg
  • Dimensions: lenght 1330mm x width 2100mm x hight 2100mm
  • Weight: 365kg
MB 7.31 Butterfly "Butterfly in a standing position" Pendulum arms offer space for different body sizes. The force curve promotes a highly effective load on the chest muscles over the entire course of the movement.

Specifications:

  • Plates: 8 x 10kg und 6 x 2,5kg
  • Maximum weight per arm: 47,5kg
  • Dimensions: lenght 1330mm x width 1760mm x hight 2100mm
  • Weight: 285kg

MB 7.32  Revers Butterfly "Butterfly Reverse" for the training of the delta, the upper back, the infraspinatus muscle and the teres minor muscle. Pendulum arms offer space for different body sizes.


Specifications:

  • Plates: 8 x 10kg und 6 x 2,5kg
  • Maximum weight per arm: 47,5kg
  • Dimensions: lenght 1420mm x width 1760mm x hight 2100mm
  • Weight: 285kg

7.33 / 7.34 Dumbbell Sets "Dumbbell sets with bench and Curl desk" are available in two versions and are primarily for the free training of the arms, the chest and parts of the back.

    • Specifications:

    • Dumbbell set MB 7.33: 2 x 11kg, 2 x 16kg, 2 x 18kg
    • Dumbbell set MB 7.34: 2 x 21kg, 2 x 26kg, 2 x 31kg
    • Rubber dumbbells secured with chains
    • Dimensions: lenght 1290mm x width 2200mm x hight 1100mm
    • Weight: 171kg / 236kg

    7.39 Biceps Curl "Bicep Curl in Standing Position" is designed to train the biceps. The secondary load is distributed on brachioradialis and the anterior part of the deltoid muscles.

    Specifications:

    • Plates: 6 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 37,5kg
    • Dimensions: lenght 1580mm x width 1880mm x hight 2000mm
    • Weight: 245kg

    7.37 Row "Standing Rowing" Breast support and a handle in the middle stabilize and assist the user during the exercise. Thanks to the independently moving arms and the additional handle, you can train bilaterally.

    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 77,5kg
    • Dimensions: lenght 1300mm x width 2000mm x hight 1940mm
    • Weight: 315kg

    7.53 Divergent Row "Divergentes Rudern" Bruststütze und ein Griff in der Mitte stabilisieren und unterstützen den Benutzer während der Übung. Durch die unabhängig bewegenden Arme und den zusätzlichen Griff kann bilateral trainiert werden. Der konvergente Bewegunsablauf bietet ein besonders ergonomisches Training.

    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 77,5kg
    • Dimensions: lenght 1300mm x width 2000mm x hight 1940mm
    • Weight: 315kg
    7.38 Lat Pull "Lat pulling" independent arms provide for a uniform power development and a varied training.
    Two different grip positions and two kicks allow training for users of different body sizes.


    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 77,5kg
    • Dimensions: lenght 1540mm x width 1800mm x hight 2450mm
    • Weight: 325kg

    7.55 Divergent Lat Pull "Divergent lat pull" The divergent movement promotes a uniform resistance profile. Two different grip positions and two kicks allow training for users of different body sizes.


    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 77,5kg
    • Dimensions: lenght 1530mm x width 1770mm x hight 2460mm
    • Weight: 335kg

    МВ 7.40 Squat "Squat machine" with separate calf part works a partially guided and alternating knee flexion training. The large diameter of the bar ensures pleasant training even under maximum load.

    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight: 150kg
    • Dimensions: lenght 1580mm x width 1860mm x hight 1940mm
    • Weight: 345kg

    7.41 Combolift "Deadlift" standing oars and shrugs in one. Exercises the back shoulder and back muscles while standing. The two handles allow a variety of training.

    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 77,5kg
    • Dimensions: lenght 1670mm x width 1800mm x hight 1840mm
    • Weight: 345kg

    7.42 Over Head Trizeps "Triceps in Standing Position" was developed for shoulder triceps exercises. The vertical hand position helps to address the triceps.

    Specifications:

    • Plates: 8 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 47,5kg
    • Dimensions: lenght 1320mm x width 2070mm x hight 1850mm
    • Weight: 260kg

    7.46 Trizeps Rope Pull "Vertical cable in standing position" for isolated triceps training. Depending on the position, the straight and oblique abdominal muscles are also addressed in this exercise.

    Specifications:

    • Plates: 8 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 47,5kg
    • Dimensions: lenght 1340mm x width 1770mm x hight 2560mm
    • Weight: 250kg

    7.43 Leg Curl "Leg Curl in Standing Position" designed to train primarily all the hind leg muscles. But mainly the leg biceps.

    Specifications:

    • Plates: 10 x 10kg und 6 x 2,5kg
    • Maximum weight per side: 57,5kg
    • Dimensions: lenght 1320mm x width 2070mm x hight 1770mm
    • Weight: 280kg

    7.44 Leg Extension "Leg extension in a standing position" for an isolated training of the quadriceps.


    Specifications    :

    • Plates: 10 x 10kg und 6 x 2,5kg
    • Maximum weight per side: 57,5kg
    • Dimensions: lenght 1320mm x width 2070mm x hight 1770mm
    • Weight: 280kg

    7.45 Standing Glutes "Rear Kick" for the training of the gluteus maximus and semitendinosus, semimembranosus muscles and the leg biceps. A booty builder with a perfect power curve.

    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight per side: 77,5kg
    • Dimensions: lenght 1650mm x width 2070mm x hight 1700mm
    • Weight: 300kg

    MB 7.51 Abdominal Crunch "AB Machine" for intense abdominal muscle training in a standing position.


    Specifications:

    • Plates: 10 x 10kg und 6 x 2,5kg
    • Maximum weight: 115kg
    • Dimensions: lenght 1320mm x width 2070mm x hight 1840mm
    • Weight: 295kg

    MB 7.49 Outer Thigh "Abductors in a standing position" for the outside of the thighs, as well as the medial and negative buttocks muscles.

    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 77,5kg
    • Dimensions: lenght 1870mm x width 1770mm x hight 2110mm
    • Weight: 390kg

    MB 7.50 Inner Thigh "Adductor in standing position" allows training of the inner thigh muscles in an upright position.

    Specifications:

    • Plates: 14 x 10kg und 6 x 2,5kg
    • Maximum weight per arm: 77,5kg
    • Dimensions: lenght 1570mm x width 1770mm x hight 2110mm
    • Weight: 390kg

    MB 7.47 Workout Station "Multistation" developed for many exercises with your own body weight and additional weights.

    Specifications:

    • Maximum load per station: 250kg
    • Dimensions: lenght 3150mm x width 1990mm x hight 2900mm
    • Weight: 495kg
    • 4 People can work out simultaneously
    • Plastic roof with lighting included

    The StreetBarbell exercise equipment can be used not only during the day, but also in the dark time of day! For the comfort of the athletes, the roofs are equipped with LED lighting. The special lights are waterproof, temperature resistant and vandalism proof.

    CATALOG DOWNLOAD

    Request offer

    Leave us your details and we will contact you as soon as possible.